Directions for mounting your print onto self adhesive foamboard:

1.) Make sure no particles, water, oil or other residue is on the underside of the material.

2) Start at the top of the panel and peel back the protective liner approximately 1 inch and fold down.

3) Position artwork on panel making sure to align the corresponding edges of the print with the panel and press into place.

4) Slowly peel back the protective liner while pressing print into place.Make sure to avoid creating air pockets between the print and panel.

5) When the protective liner has been removed,press print firmly down over entire surface.

6) The mounted print is ready to be trimmed and framed.